Rheem Hot Water Tank Anode Rod Replacement. To replace your water heater anode rod, turn off the power/gas supply, close the cold water valve and drain about 2 gallons of water from the tank. But for domestic water heater tanks purposes, sacrificial anode rods proves sufficient and inexpensive.
RHEEM HOT WATER TANK MAGNESIUM ANODE ROD EXTENDED EXTEND EXTRA LIFE 29 from www.ebay.com
If the anode rod is on the side of your tank, you might need to drain additional water. When the rod is depleted, it can no longer protect your tank. The eastman water heater anode rod helps prolong the life of your water heater by attracting impurities in the water.
It’s Currently Making Our Hot Water Smell Like Sulfur.
Use a 1 1/16” socket wrench to loosen the anode rod hex head. Find the anode or sacrificial rod. Helps prolong the life of your water heater.
When The Rod Is Depleted, It Can No Longer Protect Your Tank.
Your water heater is making popping and banging noises when heating, potentially signaling tank corrosion. The faucet will make spitting or hissing sounds periodically as air escapes through the line. Anode rods are the most important line of defense in increasing water heater tank life and preventing leaks.
Attach The Garden Hose To The “Boiler Drain” Located On The Bottom Half Of The Tank.
An anode rod is a sacrificial steel core wire wrapped with aluminum, magnesium, or zinc. The majority of anode rods on the market today are comprised of zinc, aluminum, or a mix of the two metals.because of its effectiveness in safeguarding the heater and low likelihood of causing smells in hot water, this material is preferred.all anode rods are designed to be installed in a 3″ npt socket, unless otherwise. You can partially drain about 10% of the water in the tank.
Attach Your Hose To The Boiler Drain, Which You Can Find At The Bottom Of The Tank.
Drain a couple gallons of water—about 10% of the tank’s volume. These devices work because the metal in the rod is more easily corroded than the metal of the water heater tank. Unfortunately i completely stripped the bolt for the anode rod.
To Replace Your Water Heater Anode Rod, Turn Off The Power/Gas Supply, Close The Cold Water Valve And Drain About 2 Gallons Of Water From The Tank.
Made from magnesium, the best material for preventing corrosion of your water heater. If the anode rod is on the side of your tank, you might need to drain additional water. The rod corrodes instead of your water heater tank.
Location:
Share :
Post a Comment
for "Rheem Hot Water Tank Anode Rod Replacement"
Post a Comment for "Rheem Hot Water Tank Anode Rod Replacement"